Wizart Colors Water Based Wood Stain is an easy way to add beautiful color to unfinished wood. This high performance, fast drying and odorless solution offers a quick and easy way to add rich color to unfinished wood.
Wizart Colors water based stains enhance the beauty of bare wood surfaces with intense color. It is a fast drying, transparent to semi-transparent wood stain.
Wizart Colors Water-based Wood Stain is recommended for use on bare, interior wood surfaces or surfaces from which the previous finish has been removed. Surface must be dry, clean, and free of dirt, grease, glue and any existing coatings before staining.
Apply stain with a synthetic bristle brush, foam brush, staining pad or rag. Allow the stain to dry 2 to 3 hours between layers. Applying multiple layers will result with a deeper darker color. Once the last layer has dried, apply a clear water based finish to protect both the stain and the wood.
Note:
Before you begin your project, always test the stain on an inconspicuous area or a scrap piece of wood to verify the desired color.
Safety Warning:
All of our products need to be used with proper protection. Work in a well ventilated room. Avoid contact with skin and eyes. Avoid inhalation of vapor or mist. Keep away from children