General Finishes Water-Based Semi-Gel Wiping Wood Stain, 17 Colors (Pint, Quart)
General Finishes Water-Based Semi-Gel Wiping Wood Stain, 17 Colors (Pint, Quart)
$13.46
290
Return shipping will be paid by: Buyer
California Prop 65 Warning: This product contains a chemical known to the State of California to cause cancer and birth defects. Do not swallow; first aid: drink water to dilute product. May cause eye and skin irritation; first aid: flush eyes thoroughly with water. For more information, go to www.P65Warnings.ca.gov
Item must be returned within: 30 Days
Condition: New
MPN: Does Not Apply
Bundle Listing: No
Refund will be given as: Money Back
All returns accepted: Returns Accepted
Restocking Fee: No
Brand: General Finishes
Country/Region of Manufacture: United States
Water Based Wood Stains have all the advantages of oil based stains: they spread easily, can be repaired, blend effortlessly and have plenty of open time. The thicker formula allows controlled penetration, which will reduce blotching on softer woods such as Aspen, Pine and Maple.
More Information:
Type:
Water-Based
Use
: Interior
Ambers:
No
Application
: Brush or Spray
Application On
: Raw Wood Only
Spray Tip Size
: HVLP .043 – .051 Medium Air Cap
Can Sizes
: Pint or Quart
Coverage
: 150 Sq. Feet/Quart
Topcoat Required
: Yes
Topcoat Recommended
:General Finishes High Performance Polyurethane Top Coat or General Finishes Enduro Water-Based Clear Poly Topcoat
Dry Time to Touch
: 30 Minutes
Dry Time to Re-coat
: 2 Hours
SANDING
: Do not sand stains before applying topcoat. On bare wood sand to 150-180 grit. For more open grained woods sand to 220 grit. COATS: 1 coat of stain is recommended – no more than two. If you apply multiple coats, add 10-20% topcoat to the stain to lock the color down. The other option when applying 2-3 coats of stain is to apply one coat of shellac before applying top coat. Allow to dry overnight then apply High Performance.
